A cell phone signal booster is basically a special system that improves your weak 3G and 4G LTE cell coverage. It is also known as a cellular repeater. Basically, it is a set of antennas, and cables with optional amplifiers (recommended for weaker signals) in between. As you can imagine, there are several types of cell phone signal boosters, and not all work with all wireless carriers. Thus, the ‘T-Mobile Signal Booster’ refers to cell phone signal boosters that support the T-Mobile signal.
Why Do I Have Such a Bad Signal
This is the most common question that users with poor signals ask themselves. And there are many potential reasons why you may be experiencing poor coverage. Here is a list of the 6 most common reasons:
- Topography may be preventing the signal to reach you – this includes trees, hills, mountains, and valleys, which can all block or redirect the signal causing you to have poor reception.
- Distance between your location and the cell tower may be too great.
- Building construction material is also a very common signal obstruction – metal, concrete, thick walls, energy-efficient installations, are just some of the most common signal blockers.
- Cell tower congestion – if there is only one signal tower, which many people are trying to use at the same time, the signal will appear to be much weaker.
- Weather conditions and cosmic events can also cause the signal to be reduced – luckily, those are normally not permanent signal obstructions, they are also the ones you can do nothing about.
- Electromagnetic interference – electronics, metal objects, and similar can interfere with the cell phone signal and cause poor reception as well.
Given the above reasons, you see that there are quite many ‘obstacles’ that can be blocking your T-Mobile (or any other) signal. In reality, it normally doesn’t really matter what is the reason for a poor signal (there is little you can do about hills, building material, tower distance, etc.) since you can solve all of the above with a proper T-Mobile signal booster.
NOTE: Keep in mind that a good T-Mobile signal booster may help you out perfectly in some situations and areas, while it may be of no use in others. If the outside signal is simply too weak, not even the best T-Mobile signal booster can help you.
How Does a T-Mobile Signal Booster Work
A T-Mobile booster signal works exactly the same as any other cell phone booster but with the T-Mobile signal. The majority of cell phone signal boosters are composed of three parts, and to explain how it all works, we must take a closer look at each of these parts.
- The outside antenna is the first part – this antenna is larger than the one inside your cell phone and is as such able to pick up much weaker signals. The outside antenna is also known as the donor antenna. Its main purpose is to pull in signals from the outside.
- The amplifier is the second part. Amplifier, also known as a repeater, is there to boost the signal up. The goal is to get the signal up to 60 – 70 dB (depending on the model).
- The inside antenna is the third part – this is the part that distributes the signal on the inside. It is also known as the broadcast antenna as it broadcasts the enhanced signal throughout the area. The size of the area that can be covered depends on the quality and type of all three components.
Furthermore, the cell phone signal boosters can be divided into types in various ways (by carriers, by antenna types, etc.), however, the most basic division separates them into cell phone signal boosters for home/office and vehicles. Both types of cell phone signal boosters work using the same principle, though have the sizes and designs of the parts presented above are accordingly suited.
The 8 Best T-Mobile Signal Booster Models in 2024
In this section, we will present you with the 8 best T-Mobile signal booster models. To help out as many of our readers as possible, we decided to present 4 T-Mobile signal booster models best for home and small offices, 2 best T-Mobile signal booster models for vehicles, and 2 best T-Mobile signal booster models for commercial use.
This section will enable you to simply pick one of the T-Mobile signal booster models online or in a local store, without wasting your precious time researching the options on your own.
T-Mobile Signal Booster Models for Home/Office Use
1. Flare
Highlights:
- Best For Home/office use
- Boosts 3G and 4G LTE signals
- Covers up to 2,500 sq. ft. area
- It is an award-winning product
The Flare cell amplifier for T-Mobile customers is a designer to cover one or two rooms. It is suitable for use in both residential and industrial buildings. It is one of the rare cellular amplifiers that has a combined indoor antenna and amplifier, so it’s basically a two-piece device. It is designed to serve areas of up to 2,500 sq. ft. It also covers all major carriers in the United States, including T-Mobile.
Flare is made to boost all types of services, including text, talk, and 4G LTE signal strength to achieve the fast Internet data speeds you want. It will contribute to cell talk clarity, reduce the number of dropped calls, and it will also ensure that your cell phone battery lasts longer. Besides, it is very easy to install – simply place the antennas in place and connect them with a coaxial cable.
Specs:
- Uplink Frequency Range (MHz): 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755
- Downlink Frequency Range (MHz): 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155
- Donor/Server Port Impedance: 75 Ohm / 50 Ohm
- Maximum Gain: 72 dB
- Noise Figure: 7 dB
- VSWR: ≤2.0
- Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO 4G LTE, and all cellular standards
- AC Input: Input: AC 110 – 240 V, 60 Hz ; Output: DC 5V / 3A
- Maximum Output Power: 1 Watt EIRP
- Cable: RG-6 (50 feet)
- RF Connector: F-Female
- Power Consumption: <12W
- Weight: 1.81 lb
- Dimensions: 5.125″ × 7.25″ × 5.625″
2. Fusion4Home
Highlights:
- Best For Home/office use
- Boosts 3G and 4G LTE signals
- Covers up to 4000 sq. ft. area
- Greatly improves your battery life
The Fusion4Home is a powerful T-Mobile signal booster designed for mid-sized offices and homes. It can cover quite an impressive surface – up to 4,000 ft. The Fusion4Home is a flexible and relatively affordable booster system. Simply use the coaxial cable length that best suits your needs and you can set the system up anywhere. It amplifies 2G, 3G, and 4G LTE networks for smooth cell phone service use.
It delivers faster data speeds, improves voice quality, and noticeably contributes to longer phone battery life. The Fusion4Home supports all US carriers, including T-Mobile. Say goodbye to suffering from the intermittent signal and dropped calls. If you require a maximum signal boost in rural locations, you can choose the directional Yagi and Panel antennae combination.
Specs:
- Frequency: Uplink: 698-716 / 776 – 787 / 824-849 / 1850-1915 / 1710-1755 MHz (G Block Included);
- Downlink : 728-746 / 746 – 757 / 869-894 / 1930-1995 / 2110-2155 MHz (G Block Included)
- Input Impedance: 75 ohm donor port / 50 ohm server port. Clarification: 75 Ohm Donor port is where outside antenna cable connects, and 50 Ohm server port is where inside antenna cable connects
- Average Gain: Cellular – 65 dB / PCS – 72 dB / LTE(A) – 63.5 dB / LTE(V) – 64 dB / AWS – 71 dB
- Maximum Gain: Cellular – 65 dB / PCS – 72 dB / LTE(A) – 63.5 dB / LTE(V) – 64 dB / AWS – 71 dB
- VSWR: ≥2.0
- Standard Supported: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards
- AC Power Transformer: Input AC 110V, 60 Hz; Output DC 5-15V
- DC Power: 12V
- Maximum RF Output Power: 1 Watt EIRP
- Noise Figure: 8 dB
- Cable: RG6 / SC-240
- RF connectors: F/N Connectors
- Power Consumption: <15W
- Dimensions: 7.875 x 5 x 1.188 inches
- Weight: 2 lb 3oz
3. Fusion5s
Highlights:
- Best For Large home/office use
- Boosts 3G and 4G LTE signals
- Covers up to 6000 sq. ft. area
- Greatly improves your battery life
The Fusion5s is one of the most powerful consumer boosters. It is suitable for businesses and residential buildings. It noticeably improves all wireless services signals for all major US-based carriers, including T-Mobile. The Fusion5s is capable of covering areas of up to 6,000 ft. It also conforms to FCC regulations.
The T-Mobile signal booster supports a great number of simultaneous users, which makes it great for office use as well. It also has built-in safeguards to further eliminate any interference. For a maximum signal boost in remote areas with extremely weak signal strength, choose the powerful unidirectional Yagi and Panel antenna combo.
Specs:
- Frequency: Uplink: 698-716/776-787, 824-849/1850-1915, 1710-1755 Mhz G Block Included;
- Downlink : 728-746, 746-757, 869-894/1930-1995, 2110-2155 Mhz G Block Included
- Input and Output Impedance: 50 ohm
- Average Gain: 65dB Cellullar / 72dB PCS
- Maximum Gain: 72 dB
- VSWR: XX
- Standard Supported: CDMA / WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards
- AC Power Transformer: Input AC 110V, 60Hz / Output DC 12V
- DC Power: 12V
- Maximum RF Output Power: 1 Watt EIRP
- Noise Figure: 6dB
- Cable: SC-400
- RF connectors: N Female on both ends
- Power Consumption: <25W
- Dimensions: 9-1/4″ x 6-3/8″ x 1-3/8″
- Weight: 4 lbs
4. Fusion5X 2.0
Highlights:
- Best For Large home/office use
- Boosts 3G and 4G LTE signals
- SureIQ Technology
- Auto-adjusting gain
The Fusion5X 2.0 is a commercial T-Mobile signal booster. It is designed for mid-sized buildings and large residences. The Fusion 5X 2.0 is the updated and even more powerful version of the well-known Fusion5X. It has the amplification power of up to +70 dB gain and as such covers up to two times more area with its additional downlink power.
This makes it the perfect system for all T-Mobile users. By choosing a unidirectional Yagi and Panel antenna booster kit, you can boost its effectiveness further in remote rural areas. The Fusion5X 2.0 improves talk, text, and 4G LTE reception for all major US-based carriers. It is the industry’s most powerful amplifying system in its class.
Specs:
- Uplink Frequency: 698–716 MHz/ 776–787 MHz/ 824–849 MHz/ 1850–1915 MHz/ 1710–1755 MHz
- Downlink Frequency: 728–746 MHz/ 746–757 MHz/ 869–894 MHz/ 1930–1995 MHz/ 2110–2155 MHz
- Max Gain: 72 decibels (dB)
- Power: Input AC 110V, 60 Hz / Output DC 12V
- Connectors: N-Female
- Dimensions: 9.25″ x 6.375″ x 1.375″
- Weight: 4 lbs (Booster Only)
T-Mobile Signal Booster Models for Vehicle Use
5. FusionTrek
Highlights:
- Best For Vehicle use
- Boosts 3G and 4G LTE signals
- Single user
- Simple setup in 5 minutes
FusionTrek is an innovative signal booster. It is very revolutionary since no outside cables or antennas are required. This fact makes the installation very simple – exterior antenna mounts inside the rear window of an SUV, truck, car, or other vehicle. This is a hands-free cradle system. It allows users to enjoy fast 4G LTE data, reliable text, and clear voice communications even when driving through areas with poor signals.
Specs:
- Frequency: Uplink : 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included);
- Downlink : 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included).
- Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE, and all cellular standards
- Input/ Output Impedance: 50 ohm.
- Gain Adjustment: 20 dB (Automatic).
- Maximum Gain: 23dB
- Noise Figure: ≤7 dB
- VSWR: ≤2.0
- Operating Temperature: 14°F to +122°F
- DC Car Charger: 8V-15V DC
- Maximum RF Output Power: 1 Watt EIRP
- RF connectors: SMA-Female
- Power Consumption : < 12 Watts
- Dimensions : 7.5″ x 3.5″ x 1.6″
- Cable Length: 15 Feet
- Cable Type: RG-174
- Weight: 0.62 lbs
6. Fusion2Go 3.0
Highlights:
- Best For Vehicle use
- Boosts 3G and 4G LTE signals
- Covers vehicle interior
- Simple setup in minutes
The Fusion2Go 3.0 for T-Mobile customers is a very powerful outdoor signal booster for all types of vehicles. It offers maximum power and gains to improve text, voice, and 4G LTE cell signals, which enables reliable connectivity in all types of vehicles in most remote areas. The Fusion2Go 3.0 fully conforms to all FCC regulations.
Specs:
- Frequency: Uplink: 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included);
- Downlink : 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included)
- Input/ Output Impedance: 50 ohm
- Gain Adjustment: 20 dB (Automatic)
- Maximum Gain: 50dB
- VSWR: ≤2.0
- Standard Supported: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE, and all cellular standards
- AC Power Transformer: Input AC110V, 60Hz; Output DC 5-15V
- DC Car Charger: 6V – 15V
- Maximum RF Output Power: 1 Watt EIRP
- Noise Figure: ≤ 5 dB
- RF connectors: FME Male Connectors on both ends of SC-174 Cable. Exterior cable length 12.5 ft. Interior cable length 10 ft
- Power Consumption: < 10 Watts
- Dimensions: 5.625″ x 4″ x 1.125″
- Weight: 1.43 lbs
T-Mobile Signal Booster Models for Commercial & Industrial Buildings
7. Force5 2.0
Highlights:
- Best For Large Building Use
- Boosts 3G and 4G LTE signals
- SureIQ Technology
- Award-winning Product
The Force5 for T-Mobile signal booster is an innovative commercial kit. It packs a built-in Sentry remote monitoring system, which enables advanced remote control. Because of this integrated remote access, performance can be optimized, adjusted, and controlled off-site via the mobile app. Force5 2.0 is one of the rare T-Mobile signal booster models to feature a remote monitoring system.
It offers Yagi and Panel antenna kitting option, which enables you to get the most powerful boosting option available for rural locations.
Specs:
- Uplink Frequency Range (MHz): 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included)
- Downlink Frequency Range (MHz): 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included)
- Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE, and all cellular standards
- Input/Output Impedance: 50 Ohm
- Maximum Gain: 72 dB
- Noise Figure: 5 dB
- VSWR: ≤2.0
- AC Power Transmitter: Input AC 110 V, 60 Hz / Output DC 15-20 V
- Maximum Output Power: 1 Watt EIRP
- Cable: SC-400
- RF Connectors: N Female (both ends)
- Operating Temperature: -4°F to +158°F
- Power Consumption: <65W
- Dimensions: 14.5″ x 11″ x 3.5″
- Weight: 23.5 lbs
8. Force5 2.0 Industrial
Highlights:
- Best For Industrial grade
- Boosts 3G and 4G LTE signals
- Up to 80,000 sq. ft.
- 100+ simultaneous users
The Force5 Industrial T-Mobile signal booster is a great alternative to active DAS. Mostly because it costs way less and offers a very short installation time. This is an industrial boosting system designed to improve the text, voice, and 4G LTE signals for more than 100 simultaneous users. It can cover areas of up to 80,000 ft. The Force5 2.0 Industrial will improve reception strength, users will no longer experience dropped or missed calls, and battery life for cellular devices will be extended.
Specs:
- Frequency: Uplink: 1850-1910/824-849/698-716/776-787/1710-1755
- Downlink: 1930-1990/869-894/728-746/746-757/2110-2155
- Input Impedance: 50 ohm
- Average Gain: 80dB
- Maximum Gain: 80dB
- VSWR: ≤2:0
- Standard Supported: All 2G, 3G, and 4G standards
- AC Power Transformer: 110V, 60 Hz
- Maximum RF Output Power: 27 dBm
- Noise Figure: 6 dB
- Cable: LMR400 or CM400 recommended
- RF connectors: N Female connectors on both ends
- Power Consumption: <40W
- Dimensions: 14-3/4” x 10-3/4” x 3.5”
- Weight: 8.05 lbs
The Benefits of a T-Mobile Signal Booster
The most obvious benefit of using a T-Mobile signal booster is the fact that you will be able to use T-Mobile service in areas/rooms that are otherwise covered poorly. That way you will be able to text, make calls, and even use the data of the 4G LTE network. This will also improve the quality and clarity of the voice and prevent dropout calls.
Besides, you will improve your phone battery life as your phone will no longer struggle with a poor signal, which drains the battery.
How Do I Determine My Real T-Mobile Signal Strength?
Most users know signal strength in signal bars, however, the actual signal strength is measured in dBm. -50 dBm corresponds to a great signal (full bars). On the other hand, -120dBm reflects no signal area (also known as a dead zone).
To view the actual signal in dBm, you need to access Field Test Mode on your phone (you can also use special apps):
For iPhone Users
- Intel chipset (iOS 11 & 12)
- Dial *3001#12345#*
- Tap LTE.
- Tap Serving Cell Meas.
- Your dBm is read as rsrp0.
- Qualcomm chipset (iOS 11 & 12)
- Dial *3001#12345#*
- Tap 1xEV-DO.3. Your dBm is read as RX AGC0.
- Your dBm is read as RX AGC0.
- For any iPhone pre-iOS 11
- Dial *3001#12345#*
- Swipe down the notifications bar.
- Your dBm is in the upper left-hand corner of the screen.
For Android Users: (Generally Found Under The Settings Menu)
- Tap Settings
- Tap About Phone
- Tap Status or Network
- Tap SIM Status
- Your dBm is under Signal strength
T-Mobile Signal Booster Installation
By now you know that most T-Mobile signal booster models or any other signal booster consist of 3 parts. To complete the installation properly, you just need to place each of these parts in place and connect them with the coaxial cable.
- The most important part is to measure where outside you get the best signal and position your outdoor antenna as close to that area as possible.
- Determine in which room you want to have your indoor antenna and the amplifier unit. Then choose the cable length properly.
- Place amplifier in a good well-ventilated location.
- Also ensure you have all the tools need (drilling, screwing, etc.)
- Ensure 20-25 feet of the vertical distance between both antennas to avoid oscillation.
When it comes to vehicle signal boosters, the process is relatively similar. Pay attention to cable length.
Things To Consider Before Buying a T-Mobile Signal Booster
Below is a list of the most important point to be considered when buying a T-Mobile signal booster or any other cell phone signal booster.
What Type of Wireless Connection do You Need?
Many signal boosters are universal and can be used with various wireless carriers, however, some are limited to a specific carrier. As such, make sure that the cell phone signal booster is suitable for your carrier.
Should I Get 3G or 4G?
Since most cellular carriers are in the process of shutting down 3G towers, you should absolutely focus on 4G LTE signal boosters.
Number of Users and Devices
This is an extremely important aspect; you really need to know how many users plan on using the boosted signal and get the booster that can match your needs. Keep in mind that the strong amplification that a booster offers, the more users it can support. Moreover, the exact numbers of users are always just estimates.
Outside Signal Strength
Outside signal strength is the key. If the outside signal is non-existing or extremely low, you may not be able to amplify it at all. As such, always measure outside antenna positioning options and place it where the signal is the strongest. Moreover, use the proper combination of donor antennas (Yagi vs. Omni).
Antenna Type
As mentioned in the above paragraph, there are two main types of donor antennas – Yagi (directional) and Omni (360°). Yagi is a better choice for weaker signals if you have a proper place to install them. Moreover, there are different indoor antennas as well. However, those play a smaller role in the signal strength and more on the esthetic point of view.
Cable Length
This is not to be overlooked. Over determine where you plan to position your units and remember to account for the cable’s path (along with the wall’s corners). Measure properly and add a little extra length. The last thing you want is to have too short cable.
Know What Area You’re Trying to Cover
Make sure to determine whether you need to cover a single room, a couple of rooms, a whole house, or maybe a commercial/industrial building. This will enable you to determine the type of signal booster that you need to consider.
Consider a Multi-Bandwidth Device
If you have users on different carriers, then it makes a lot of sense to consider a multi-carrier booster, which will enable you to boost signals for multiple carriers simultaneously. Keep in mind that single-carrier solutions offer more power, while the multi-carrier option offers more versatility.
Frequently Asked Questions
Can I Use My T-Mobile Signal Booster Outside?
The majority of the T-Mobile signal booster models have an outside unit (donor antenna) that is designed for outdoor use. However, amplifiers and indoor antennas, are usually not weather-proof. If you were to use the entire system outside, you’d need to offer some sort of weather protection for the amplifier and the indoor antenna.
Will A Signal Booster Work On My T-Mobile Phone Or Cellular Device?
This completely depends on the signal that is available outside. If the signal is detectable and is you use a powerful booster that is compatible with your carrier, it should work for you.
What Kind Of Devices Are Compatible With T-Mobile Phone Booster Models?
Any kind of 3G and 4G T-Mobile-SIM-based operable devices are compatible with T-Mobile phone boosters.
How Many Phones Does A T-Mobile Signal Booster Support?
It totally depends on the type of signal booster and the strength of the signal.
Can I Take A Vehicle Booster And Use It For My Home?
The installation process slightly depends on the signal booster type, however, with proper tools, the installation can easily be done in 1 hour. However, additional need for drilling and roof-top installation constricting can prolong the process.
Can I Take A Vehicle Booster And Use It For My Home?
Since it works on the same principle, you could use it for a small room, of course.
Are T-Mobile Signal Booster Models 5g Compatible?
This really depends on the position of your houses, apartments, etc. However, in general, your neighbor will need to use their own signal booster as the whole purpose is to catch a signal outside and amplify it inside.
Are the T-Mobile Boosters Waterproof?
Outside units are almost in all cases weather-proof, however, the amplifier and the internal antenna are normally not waterproof.
Are T-Mobile Signal Booster Models 5g Compatible?
Those that are 5G-ready are fully compatible with the 5G signal.
How Many Indoor Antennas Should I Buy?
This depends on your need and the number of users. Get as many as you need to cover your needs. Make sure to get a proper amplifier – the one that will enable you to connect several indoor antennas or use an additional signal-divider unit.
Do I Need a Home T-Mobile Signal Booster?
If you are a T-Mobile user and are facing a poor indoor signal, then you should definitely consider a T-Mobile signal booster.
Additional Resource: How To Get No Credit Check T-Mobile Latest Smartphone
